[分享]GP1288 的系統啟動畫面 技術文件

所有GP1288 的技術文章將放在這裡
本板部分文章來自樂酷網,轉貼繁體版屬娛樂酷網站長授權,未經允許,嚴禁轉貼至其他網站

版主: 總版面管理員

Mowd
系統管理員
系統管理員
文章: 1824
註冊時間: 2003-07-16 6:31 PM
來自: 台灣台北
聯繫:

[分享]GP1288 的系統啟動畫面 技術文件

文章Mowd » 2003-10-10 1:03 PM

代碼: 選擇全部

Loading R[23]00 MMU routines.
CPU revision is: 00002200
config reg = 00000030
Instruction cache 4kb, linesize 16byte
Data cache 1kb, linesize 4byte
Linux version 2.2.19 (root@linuxserver) (gcc version egcs-2.90.27 980315 (egcs-1
.0.2 release)) #1423 Sat Jul 6 17:46:39 CST 2002
GVPDA-TX3911 System Setup
TX3911 55.2Mhz
serial_console_init
console_setup param:<NULL>
setup_machine_info:Cpu type is 0
OFF_UARTA_CTL1 = 0xc0008401
OFF_UARTA_CTL2 = 0x00000001
=== con_init ====
videomemory start at 803d6000
wakeup_memory start at 803dc000
Console: colour dummy device 80x25
Calibrating delay loop... 39.93 BogoMIPS
Memory: 11384k/15356k available (1204k kernel code, 2756k data)
Dentry hash table entries: 2048 (order 2, 16k)
Buffer cache hash table entries: 16384 (order 4, 64k)
Page cache hash table entries: 4096 (order 2, 16k)
Checking for 'wait' instruction...  unavailable.
#### ENTRY init #####
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
TCP: Hash tables configured (ehash 16384 bhash 16384)
IrDA (tm) Protocols for Linux-2.2 (Dag Brattli)
Starting kswapd v 1.7
register_filesystem(minix)
Linux LCD GVMISC Device Driver version 0.01
Gobal View Debug driver : v0.1
AFC Version = 0
Linux Power manager Device Driver version 0.01
mips_cputype = 30
fb0: TX3912 VIDEO
240 x 160, 2 bpp, 18K of video memory
Console: switching to colour frame buffer device 30x20
&&&&&&&&&&&&&&&&& rs_init.............
UART DMA address start at 0x80ed3380
setup_machine_info:Already setup for Cpu type is 0
OFF_UARTA_CTL1 = 0xc0008401
OFF_UARTA_CTL2 = 0x00000001
TX39 UART driver version 0.04
pty: 256 Unix98 ptys configured
GVPDA button module initialized
begin blk_dev_init:

fl_init(): NANDHardReset...ok
id=75ec(ec,75,0,0)
flash_start_block=41
flash_start_sector=1312
gvkernelsize=656k
clean=0xffffff, max=free=65504, bad=65505, reserved=65506, super=65507
FLASH ID = (EC75) : (Samsung : TC58256xx/KM29U256T)
load_map
#########
supermap[0]=2015
supermap[1]=2014
checking gvflashid & osid from page 30:
 gvid:[47][6c][6f][62][61][6c][20][56][69][65][77][20][4e][61][6e][64][20][46][6
c][61][73][68]

 osid:[6a][61][75][6d][69][6e][67][2e]
gvid found
osid found

 factorybads:[1f][00]
factory bad block counts: 31
loading badblocklist from superblock 2015...ok
loading reservedlist from superblock 2015...ok
extra reserved blocks: 30/32
test: 1984=get_clean_reserved_block()
total 31 bad block(s)
building bad block list...ok
finding swap block:[*]flash_swap_block=262
FlashDisk v7k: pda2 build 20020513
MAXSWAP = 32
FLASH disk driver initialized: 1 FLASH disks of 30576K size
fl_init ok
GVRD disk driver initialized:  #1 GVRD disk of 0K size
RAM disk driver initialized:  1 RAM disks of 1024K size
rd_init ok
XIP disk driver initialized:  #1 GVRD disk of 0K size
XIP disk driver initialized:  0 RAM disks of 0K size
loop: registered device at major 7
loop_init ok
blk_dev_init ok
end blk_dev_init:
begin net_dev_init
PPP: version 2.3.7 (demand dialling)
TCP compression code copyright 1989 Regents of the University of California
PPP line discipline registered.
PPP BSD Compression module registered
PPP Deflate Compression module registered
end net_dev_init
begin console_map_init
end console_map_init
begin setup_dev
p=00000000
gendisk_head=00000000
end setup_dev
IrDA: Registered device irda0
init gvpda_fastio_init succeed :))))))))))
minix_read_super: [*]'inodeblocks'=319
[*]imaps=2
[*]zones=4
[*]imap_end=8
[*]zone_end=16
[*]inode_end=654
mounted
MINIX-fs: mounting unchecked file system, running fsck is recommended.
VFS: Mounted root (minix filesystem).
Filesystem readwrite (dev 3c:00).
  mount_root()
do_basic_setup() ok !
Freeing unused kernel memory: 48k freed
Mem-info:
Free swap:            0kB
3839 pages of RAM
981 reserved pages
0 pages shared
0 pages swap cached
0 pages in page table cache
2819 free pages
Buffer memory:         12kB
Buffer heads:        28
Buffer blocks:       12
Buffer hashed:        9
    CLEAN: 8 buffers, 6 used (last=6), 0 locked, 0 protected, 0 dirty
    DIRTY: 1 buffers, 1 used (last=1), 0 locked, 0 protected, 1 dirty
Networking buffers in use          : 0
Total network buffer allocations   : 0
Total failed network buffer allocs : 0
IP fragment buffer size            : 0
mount /proc ok! :)
open /dev/console
freepages_check=1536
init started:  BusyBox v0.60.1 (2002.04.18-06:05+0000) multi-call binary
<<<<<<<<<< progress 5 >>>>>>>>
freepages_check=1536
mounting ramdisk
352 inodes
1024 blocks
Firstdatazone=15 (15)
Zonesize=1024
Maxsize=268966912

freepages_check=1536
minix_read_super: mounted
freepages_check=1536
freepages_check=1536
freepages_check=1536
freepages_check=1536
freepages_check=1536
Starting power manager daemon....

Create queue error=[2]
freepages_check=1536
freepages_check=1536
fsck.minix, 1.2 - 11/11/96
Filesystem on /dev/flash0

   578 inodes used (5%)
 20734 zones used (67%)

   387 regular files
    86 directories
    44 character device files
     5 block device files
     0 links
    56 symbolic links
------
   578 files
[*]super-block
update logical 1k-block:1
freepages_check=1536
<<<<<<<<<< progress 6 >>>>>>>>
freepages_check=1536
freepages_check=1536
open fastio
1 pname:
set idle wait
[*]clear_queue(): msgrcv: No message of desired type
server: respawn_start
freepages_check=1536


Running HandWrite Daemon...

freepages_check=1536
# len=44980
[*]is_pid_alive(-1): access: No such file or directory
fbcon_setup: No support for fontwidth 8
fbcon_setup: type 0 (aux 0, depth 1) not supported
Set MONO video mode
len=615
open tpanel
Loading Chinese font(fonts/chinese/hzx12) ...done.
Loading ASCII font(fonts/chinese/asc12) ...done.
Filesystem readwrite (dev 3c:00).
  voltage_ioctl:SNDCTL_CHK_WRITE_PROTECT
/dev/at88sc153: Operation not supported by device
endfun_handler:msgrcv: No message of desired type
freepages_check=1536
[!]server: msgrcv: Interrupted system call
Set 2BPP video mode
Date:2002/06/13 10:14:38Ver=2.0
/pda/gv/msg/gvtime.msg: No such file or directory
open tpanel
endfun_handler:msgrcv: No message of desired type
freepages_check=1536
[!]server: msgrcv: Interrupted system call
Date:2002/06/13 10:14:29 Ver=2.0
/pda/gv/msg/mpanel.msg: No such file or directory
open tpanel
endfun_handler:msgrcv: No message of desired type
DB_open ***************fptr=progname
DB_open dirname=/pda/gv/data/sys/***************fptr=progname
Date:2002/06/13 10:13:41ver=2.0
/pda/gv/msg/npd.msg: No such file or directory
open tpanel
endfun_handler:msgrcv: No message of desired type
phone.bin: No such file or directory
cj.bin: No such file or directory
boshiamy.bin: No such file or directory
Loading handwrite DB [DBHK.dat] ... /mwin/mwin/mwin/DBHK.dat: No such file or di
rectory
error!!!
/dev/at88sc153: Operation not supported by device
/dev/at88sc153: Operation not supported by device
Loading Chinese font(fonts/chinese/hzk12) ...done.
/dev/at88sc153: Operation not supported by device
/dev/at88sc153: Operation not supported by device
/dev/at88sc153: Operation not supported by device
/dev/at88sc153: Operation not supported by device
freepages_check=1536
[!]server: msgrcv: Interrupted system call
open tpanel
endfun_handler:msgrcv: No message of desired type
Mowd 與你的交流天地
歡迎您的到來

頭像
bk3838
三級會員
三級會員
文章: 534
註冊時間: 2003-08-05 10:43 PM
來自: 地球

文章bk3838 » 2003-10-10 8:14 PM

不錯!
能修改嗎?
權限越高,責任就越大!

-----------------------------------------------------------------------------------------------

Mowd
系統管理員
系統管理員
文章: 1824
註冊時間: 2003-07-16 6:31 PM
來自: 台灣台北
聯繫:

文章Mowd » 2003-10-10 10:16 PM

修改什麼呢?
這是啟動畫面,不是可以自訂的喔!
Mowd 與你的交流天地
歡迎您的到來


回到「GP1288 技術文章」

誰在線上

正在瀏覽這個版面的使用者:沒有註冊會員 和 2 位訪客